Type E Wood Hog - Fine Grinder and Shredder

The Jeffrey Type E shredder is designed for secondary and tertiary wood applications, where fine-finished product is required. Finished products are typically 1/4", but can be less with certain applications.

Type E is available in both vertical and horizontal-feed arrangements. The horizontal-feed arrangement is typically used for lightweight, fibrous materials, such as wood waste and shavings, used for the manufacture of MDF, OSB and others.

As a secondary shredder, the machine incorporates thinner plate-type hammers to increase the cutting action in the shredding chamber. Typically, in secondary applications, infeed piece size should not be over three inches. The smaller infeed size has a direct effect on the reduction ratio of the material, thus giving a better result and reducing machine wear. 

Jeffrey Specialty Equipment supplies products to sawmills, planermills, plywood, OSB, LVL and MDF plants.